What a Microcement Renovation Actually Looks Like: Before, During, and After

Most people understand the end result. They have seen the photographs — the seamless floors, the grout-free bathrooms, the feature walls that look like they belong in an architectural magazine.

Few understand what the process actually involves.

Before: Assessment and Preparation

Every microcement renovation begins with a site assessment. The assessment covers substrate condition, moisture readings, and surface preparation requirements. This is where most amateur installers skip steps — and where most failures originate.

Preparation phase typically takes one day for a standard bathroom renovation.

During: The Application Process

Day 1–2: base coats. Day 3: colour coat — this is where the artistry of the installation becomes visible. Day 4: two to three coats of sealer. Day 5: final inspection and handover.

Total timeline for a standard bathroom renovation: 4–5 days on site, plus 28 days full cure time.

After: What You Have

A properly installed microcement bathroom is a fundamentally different environment from a tiled bathroom. The absence of grout lines changes the visual weight of the space. The continuous surface makes the room feel larger.

Maintenance is simple: clean with a pH-neutral cleaner, avoid abrasive products, and reseal every 3–5 years in high-traffic wet areas.

Ready to start your renovation? Submit your project →